Mewto - Seperated by Colors - Free standing - Free 3D Print Model

Search models, users, collections, and posts

Signis

Art>Sculptures

IP Report

Print Profile(6)

All

P1S

P1P

X1 Carbon

X1E

H2S

P2S

H2D

H2D Pro

A1 mini

X2D

H2C

P1S+

Designer

6.6 h

3 plates

4.7(12)

More Support Version - 0.12mm layer, 2 walls, 15% infill

Designer

6.1 h

3 plates

4.0(2)

A1mini+

Designer

6.4 h

3 plates

4.6(5)

HSD+

Designer

6.4 h

3 plates

5.0(1)

Click to see more

Open in Bambu Studio

Boost

198

503

417

198

Released

Bill of Materials

Bambu Filaments

Select all

Matte Ivory White (11100) / Refill / 1kg

Description

Mewto

This model is seprated by colors to have an more efficent print.

I have printed the Mewto in its shiny form, but for sure you can print it also in normal.

Just change the color for that in the settings.

In case you are facing the problem that the leg is kicked down during your print, i have uploaded a adapted version.
Please download then the “More support version”.

Size: 16cm

Boost Me (for free)

Thank you for your support! 😊❤️

______________________________________________

Other Pokemon models:

Accessories:

>> Complete Pokemon model Collection <<

______________________________________________

Other Pokemon-Keychains

>> Complete Pokemon Keychain Collection <<
____________________________________________
Other Nintendo-Keychains

>> Complete Nintendo Keychain Collection <<

__________________________________________________

Here you can find more interesting projects :)

Boost Me (for free)

Thank you for your support! 😊❤️

Comment & Rating (40)

@GetgetPing

Boosted

Print Profile

A1mini+

Great I just had to cut the bust because it failed 2 times in a row I cut the legs and the bust and the arms

The profile uploader has replied

Show original

@Signis

Looks very good :) But that sounds not so good. What happend? When the object is not perfectly alinged horizotally then it can happen that the legs will not connect. And its not so easy to see the misalingment because its just 1 degree :(

@GetgetPing

Boosted

Replying to @Signis :

My printer is an A1. When the body printed, both times, either the nozzle knocked the body off the build plate or it broke. So I decided to cut it into four parts using Bambu Studio and then glue them together.

(Edited)

@Signis

Replying to @GetgetPing :

Okey the error you describe was the same as when the body was not horizontal aligned.. So when this happen without that on an A1,,, i think i need to add a print profile with more support then. Thank you for that info :)

(Edited)

@user_2847963438

Awesome print! need to finish the eyes, and ran out of purple, transition in the tail, but for a first print, with zero issues other than material running out(my bad), this turned out amazing!

(Edited)

The designer has replied

@Signis

Nice colors👍😊

@user_1430106510

Print Profile

HSD+

(Edited)

The profile uploader has replied

@Signis

Hey @user_1430106510, can you please download the print profile again? i have check the H2D+. The "Avoid crossing wall" was not activated there. When you start the print please take care that this setting is active. Please let me know if you have to activate it manually. Quality -> Advanced:

@user_1430106510

Replying to @Signis :

ok I tried printing it again and H2D Pro was selected. I had another failure with the same problem. Detached at the same time and the nozzle buried itself into the leg. I did another Print Calibration on my unit before I started.

@Signis

Replying to @user_1430106510 :

Hey @user_1430106510, added now an adapted version with more support. You can download the "More support version" in case you want it to try again. Sorry for the inconvince.

@kuuji

Print Profile

P1S+

very cool, my kid Loves it

@user_3210999527

how did you do with the tail, with a few minutes left, just when both sides of the tail were about to connect, the smaller side detached from its support, please help me, what should I do, I have a Bambu Lab A1 combo

Show original

@user_1430106510

Failure for the second time trying to print this. I noticed that the nozzle isn’t raising enough and actually burnt the plastic. it happens at around 1 hour and 57 mi utes left. please check this out. I had failure yesterday and I thought it was because of detachment from the plate. so I used stick glue and that’s what led me to see the Data isn’t correct at this time of printing.

@Carrilyn

Print Profile

P1S+

@user_3420924189

Print Profile

P1S+

Guter Druck

The profile uploader has replied

@Signis

Thank you for your feedback 😊❤️

@brit.yates

Boosted

nice

The designer has replied

@Signis

Thank you for your boost ❤️😊

@tonyst

Print Profile

P1S+

printed fine on x1c. Feet dont need brim or raft so i'd take them off if i printed again

@imhwijun7

Print Profile

P1S+

Mewtwo is the strongest psychic type

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.