Super Mario Firepower
Print Profile(1)
Description
Boost Me (for free)
boost it if you like it!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.72mm
The Max allowed Thickness is 3.76mm and the Actual Thickness is 3.6mm
#0f1821 PLA Sunlu Black Transmission Distance: 0.1
#9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#ce2029 PLA ESun Fire Engine Red Transmission Distance: 4.7
#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Ash Gray
At layer #18 (1.52mm) swap to Jade White
At layer #28 (2.32mm) swap to Fire Engine Red
At layer #38 (3.12mm) swap to Pumpkin Orange
At layer #41 (3.36mm) swap to Sunflower Yellow for the rest.
If you are looking for a frame I use these by user dawm
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)