Billard Rack - 8-Ball / 9-Ball / 10-Ball
Print Profile(16)
Description
Best Parameters (Update: 2026.04.19)
- Printer: H2C, H2D
- Build Plate: SIROL, Chameleon-PEY (Black with Stars)
- Material: High Speed Matte PLA (from Techbears)
- Nozzle: 0.6 mm / Standard
- Slicer Setup:
- Layer height, Initial: 0.1 mm
- Line width, Initial: 0.8 mm
- Wall Generator: Arachne
- Advanced, Order: inner/outer
- Advanced, Initial layer flow Ratio: 1.1
- Advanced, Only one wall on top surfaces: Not applied
- Wall loops: 33
######################################
This are the Billiard Rack we use in Billard Club Einsiedeln (Switzerland).
The allowed thickness for Tournaments is 0.12 mm.
Special Print Setting: Initial layer flow ratio = 1.25
This additional 25% of Filament ensures no holes and a stable product. This is important not to lose any characters from text.
Proper cleaning of your Nozzle before and after printing is required!
Happy printing and fun with your powerful break (not losing energy when the billiard balls are not touching each other)
(I also designed a one for all Rack. On request I will upload this Multi Rack as well.)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (34)