It printed well. A little rough on the bottoms where the supports are but nothing is seen when placed together. looks great and my daughter loves it! 

Debbie’s Cabib Creations

DarcyStorm789

小号--高度14CM，盒子直径10CM

Small size--height 14CM, box diameter 10CM

g0llum

优化模型悬垂，切平底面--高14CM，直径10CM

Optimize model overhang, cut flat bottom surface -- height 14CM, diameter 10CM

Jonny N

大号粉色--原尺寸放大150%

Large Pink -- 150% original size

Czigler

Very cute model but the way the bases of the parts are made creates horrible corners/edges even with supports. Had things been more designed for a 3d printed model these should have been avoided. Everything other than the supported lower halfs prints perfect but the lower rounded edges werent well thought.

热咖啡不加冰

cover

GIF.gif

海报-横版 拷贝.jpg

IMG_20251031_134737 拷贝 2.jpg

IMG_20251031_134737 拷贝.jpg

粉色.jpg

IMG_20251102_101713 拷贝.jpg

IMG_20251102_101711.jpg

IMG_20251031_134049 拷贝.jpg

IMG_20251031_134124 拷贝.jpg

IMG_20251031_134452 拷贝.jpg

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

2025-11-01_3c02075cf8a58.jpg

Snipaste_2025-11-14_00-02-57.png

这个配置是底面切平了一刀，这样跟打印板贴合，底面平直悬垂更少。切片参数和支撑略有调整。缺点就是没那么圆润，手部与盖子可能会没那么严密，自行取舍吧。FDM打印机的悬垂一直就是个无法逾越的问题，通过切片参数的调整那是效果微乎其微，只有改变模型的外观去妥协或者分件但有大缝隙，各自平衡只能看个人偏好了。

This configuration has the bottom surface cut flat once, so it fits closely with the printing plate, resulting in a flatter bottom and less overhang. Slicing parameters and supports have been slightly adjusted. The downside is that it's not as rounded, and the handle and lid might not be as tight; you'll have to decide for yourself. Overhang on FDM printers has always been an insurmountable problem; adjusting slicing parameters has a negligible effect. The only options are to compromise by changing the model's appearance or splitting parts, which may result in large gaps. The balance depends on personal preference.

Optimize model overhangs, flatten the bottom surface -- scale to 150%

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>为我助力</boosttitle></boostme>储物盒分上下两层，上半部分是小狗，可以放一些小物件，顶部的咖啡色帽子是螺旋的盖子，可以拧上密封。下半部分的盒子是大空间储物。也可以上下两部分分开摆放，作为不同的储物盒子。放一些零食或者钥匙，首饰，零件等等均可。颜色可以自己喜好去搭配更改，就看你自己的想象力了。

<boostme><boosttitle>Boost Me</boosttitle></boostme>The storage box is divided into upper and lower layers. The upper part is a puppy, which can hold some small items. The coffee-colored hat on top is a screw-on lid that can be twisted shut for sealing.The lower part of the box offers large-capacity storage. The upper and lower sections can also be separated and used as different storage boxes. It can hold snacks, keys, jewelry, parts, and more.You can mix and match colors according to your preference; it's all up to your imagination.

Sanrio Pompompurin Double-Layer Storage Box Candy Box Key Storage Box Snack Box Entryway Storage Box

ASIA

Print Profile(4)

Description

Comment & Rating (5)

License

Related Models