Camera Roof - Free 3D Print Model

Search models, users, collections, and posts

Batesman17

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

P1S

H2D Pro

H2S

X1 Carbon

H2C

P1P

P2S

H2D

X1E

A1 mini

X2D

A2L

0.2mm layer, 3 walls, 5% infill

Designer

4.7 h

1 plate

4.9(7)

Open in Bambu Studio

Boost

230

161

Released

Description

A custom roof designed for the Wyze Pan Cam v3, perfect for adding protection from rain and snow. Ideal for any outdoor cameras or device you want to give a little extra shelter. I installed mine on an exterior wall fully exposed to the elements, and it’s held up great. The model was 3D printed in translucent PETG to allow light through without blocking visibility.

Dimensions:

Width: 6.1 inches
Depth: 5.9 inches
Height: 3.2 inches

Mounting is simple — I drilled holes in the back plate to match the camera bracket. Drilled into the brick and put some plugs then screwed the camera bracket and roof into the plugs. The model can be scaled to fit other applications without distortion.

Print settings used:

No supports required
0.20 mm layer height
5% infill
3 Wall Loops

Boost Me (for free)

If you find this useful, I’d really appreciate a boost or like — it helps a lot!

Comment & Rating (13)

@BossManSetchy

Boosted

Print Profile

0.2mm layer, 3 walls, 5% infill

printed perfectly in white inland PETG. I was having an issue where water would clog up the mic on my wyze pan v3 and hopefully this will fix the issue. It is a little difficult to get the set screw into the camera after mounting the little roof and that's why I mounted it the way I did. Great functional print, thank you!

The profile uploader has replied

@Batesman17

Thank you for the feedback. I am happy to hear that the camera roof printed well. I think when I mounted my camera I turned the camera bracket around so I could mount camera to the bracket and the roof with the same screws to hold the camera bracket. Looks like yours turned out great. Hope it protects the mic. Thank you for the boost!

(Edited)

@BossManSetchy

Boosted

Replying to @Batesman17 :

ohh I wish I would've noticed that lmao, that's what I get for doing it last minute. I will rotate the mount next time I go down to my cabin. thanks again

@Serginhos

@Batesman17 how big is the part that attaches to the wall

The designer has replied

Show original

@Batesman17

The part that attaches to the wall is 8.3cm

Show original

@Serginhos

always the part that fixes to the wall how tall is it

Show original

@jrich5250

Boosted

Print Profile

0.2mm layer, 3 walls, 5% infill

this is exactly what I needed

The profile uploader has replied

@Batesman17

Great to hear. Thank you for the boost!

@user_338114301

Print Profile

0.2mm layer, 3 walls, 5% infill

nice, very solid

Show original

@dadeduke

Print Profile

0.2mm layer, 3 walls, 5% infill

@ptran1226

Print Profile

0.2mm layer, 3 walls, 5% infill

@bbbsome1

Print Profile

0.2mm layer, 3 walls, 5% infill

@3dplus

Print Profile

0.2mm layer, 3 walls, 5% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.