Matthew Ghost

cover

IMG_6333.jpg

plate_1.png

plate_2.png

plate_3.png

2025-10-31_33d5a212958838.jpg

Multiple Sizes (0.2mm layer, 2 walls, 15% infill)

Widths 10, Lengths 24, 28, 32, 36, 40

Bedan Designs

IMG20251106061210.jpg

Cable Clip.png

This profile is a highly specialized functional optimization designed to maximize the durability, longevity, and print reliability of this tool. It is specifically tuned for Bambu PETG filament, which is essential for environments with elevated temperatures or stress (e.g., inside a hot vehicle or near electronics). It focuses on strengthening the shell and fine-tunes the support separation for flawless, precise functional surfaces.Key Functional and Structural Optimizations (Substantive Value):<ol><li>PETG Material Conversion (Critical Functional Upgrade):<ul style="list-style-type: circle"><li>Modification: The profile is specifically tuned for Bambu PETG filament.</li><li>Justification: This conversion is essential to enhance the model&#39;s functional utility. PETG offers superior heat and chemical resistance compared to PLA, making the clip suitable for challenging environments (e.g., cars, workshop, near heat sources) and increasing its overall service life and resilience to breaking.</li></ul></li><li>Extrusion Width Adjustment for Durability (0.45mm):<ul style="list-style-type: circle"><li>Modification: The outer wall extrusion width has been deliberately set to 0.45mm (a slight over-extrusion).</li><li>Justification: This is the most critical structural enhancement for a functional tool. This subtle increase in width significantly boosts the shear strength and layer adhesion of the clip&#39;s shell, making it more robust and ensuring long-term durability, especially when combined with the enhanced properties of PETG.</li></ul></li><li>Optimized Z-Axis Clearance for Functional Surfaces:<ul style="list-style-type: circle"><li>Modification: The Top Z-Axis Support Distance was precisely set to 0.22mm.</li><li>Justification: This precise, slightly increased clearance is crucial for functional parts that require a smooth, clean base or internal cavity (for the cable). It guarantees a clean separation between the support material and the model, resulting in a smooth, non-binding internal surface.</li></ul></li><li>Structural Infill for Robustness:<ul style="list-style-type: circle"><li>Modification: Infill is set to Gyroid 8%.</li><li>Justification: Gyroid 8% provides excellent structural rigidity, which is essential for a functional, stressed item like a clip. The chosen density is an efficient balance that ensures the clip is robust enough to withstand repeated stresses without unnecessary material consumption.</li></ul></li></ol>&nbsp;Thank you to the author for creating this amazing model!Printer and Verification: This profile has been successfully verified with a Bambu Lab P2S printer.&nbsp;

P2S PETG Functional | Widths 10 | Lengths 24, 28, 32, 36, 40

6 more walls and less infill

10 more walls and less infill

14 more walls and less infill

6 TPU

plate_4.png

Midland3D

Bild_2026-02-22_115623454.png

Bild_2026-02-22_115637170.png

<ul><li>Added settings for TPU &amp; PETG</li><li>Added Walls for a stronger hold especially for heavier and bigger cables</li><li>Fast and easy to print</li></ul>

TPU&PETG settings|Added walls for more stability

Laurissss

fe40b196-846c-4fc9-902f-a7d8c9b9b5ea.jpg

574bfafa-d92e-47f5-930c-91a2c571963c.jpg

cb374491-ced1-47ae-989b-ff1c1e6f2009.jpg

This is a minimalist, snap-in cable organizer designed to keep your charging cords perfectly routed and ready on your desk, nightstand, or workspace. It stops your USB-C, Lightning, and laptop cables from slipping off the edge of your desk when unplugged.Features<ul><li>Secure Cable Grip: Precision-molded slots hold standard charging cables firmly without pinching or damaging the wire.</li><li>Easy Snap-In Design: Flexible retention arms allow you to easily pop cables in and out with one hand.</li><li>Clean Workspace: Keeps multiple cords organized side-by-side, preventing tangles and messy cable nests.</li><li>Low-Profile &amp; Sturdy: Designed with a wide, flat base optimized for double-sided mounting tape (like 3M VHB) or adhesive putty.</li><li>Print-in-Place: 100% support-free geometry that prints cleanly in minutes right off the build plate.</li></ul>Recommended Print Settings<ul><li>Material: PLA works perfectly for general desktop use. PETG offers slightly more flexibility and durability for the snap-in clips.</li><li>Orientation: Print flat on its base.</li><li>Layer Height: 0.2mm for smooth curves and clean slot clearance.</li><li>Wall Loops: 3 walls to ensure the flexible clip arms are strong and won&#39;t snap after repeated use.</li><li>Infill: 15% – 20% (Gyroid or Grid).</li></ul>If this organizer cleans up your desk setup, please boost, download, and share a photo of your cable management!

0.24mm layer, 3 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Keep your cables tidy and organized with the Cable Clip ✨! Designed for everyday use, this practical clip keeps your cords in place and releases instantly — just press the side wings to open it.<ul><li>Easy side–release – press the wings to unlock. 🔓</li><li>Use PETG – durable and flexible.</li><li>Small plastic deformations are normal and functional.</li><li>⚠️ Note: If you use the STL file (instead print profile), make sure to Split Object in your slicer before printing!  Then set up supports as shown below for best results.<figure class="image image_resized" style="width: 40.97%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001944124/design/2025-10-31_2044bc2c0c2fa.png"></figure><figure class="image image_resized" style="width: 38.93%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001944124/design/2025-10-31_8f3c6b3c22129.png"></figure></li><li>Available in multiple sizes for different cable bundles.</li></ul><figure class="table" style="width: 49.27%"><table class="ck-table-resized"><colgroup><col><col><col><col></colgroup><tbody><tr><td>Widths</td><td>6</td><td>10</td><td>14</td></tr><tr><td>Lengths</td><td>20, 24, 28, 32, 36</td><td>24, 28, 32, 36, 40</td><td>28, 32, 36, 40, 44</td></tr></tbody></table></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001944124/design/2025-10-31_618296dcb37808.png"></figure>&nbsp;

Cable Clip | Cable Organizer | Multiple Sizes

ASIA

Print Profile(4)

Description

Trophy Builder - Design & Print your Own Medal or Cup🏆 More Info Here 👇

Comment & Rating (671)

License

Related Models