Creality ender 3 v3 ke/se Harness Organizer Bracket

The wiring harness of the Ender 3 KE machine is in an unsupported state, so when the machine is running, the harness travel will be relatively large, and in a loose state, it occupies a larger space. This organizer bracket perfectly solves this problem.

It includes two parts: first, a front-side harness restraint and heightening component, and second, a harness redirection accessory, which allows the harness to run horizontally. This reduces bending of the harness and makes its movement smoother.

The heightening accessory consists of three parts: a base and two connectable components. The print files are divided into three plates, mainly to prevent collapse during the printing of tall models, which could affect the entire print progress. For better printing, a 0.2mm high diaphragm has been added to the bottom, which can be cut off with a knife after printing.

Assembly is not difficult: snap the base into the side of the pillar, attach the two heightening accessories, and install the rear harness redirection accessory. Simply insert the buckles into the existing slots.

Due to differences in materials and printer types used, print quality and tolerances may vary. If you find the fit is too loose or too tight after printing, you can scale parts of the model accordingly.