Santa Claus on his sleigh magnet
Print Profile(1)
Description
Hueforge created with a Christmas theme. 2 .3mf version, with and without writing
The image size is 90x60mm.
In the .3mf file I uploaded, everything is already set up with the correct color changes and pause configured to print the piece with the magnets to be inserted inside (you can also skip printing it and simply glue the image directly).
The holes designed for the magnets are for the most common size magnets with a diameter of 1cm and a height of 2mm.
The piece with the included magnets was designed to be glued behind the image using any type of glue.
Created on two plates to avoid material waste during color changes.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Grey
At layer #18 (1.52mm) swap to Jade White for the rest.
You don’t need to do anything else except start the print, everything is already configured!
I hope you like it, and Merry Christmas!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)