Mega炎武王 宝可梦传说ZA | Mega Emboar - Pokemon Legends ZA
Print Profile(2)
Description
The overall height of the model is approximately 14cm, requiring only simple assembly and a small amount of glue for installation.
Parts have been reasonably separated, but because some components are quite small or have special shapes that are difficult to print successfully, not all sections have been completely split apart, and multi-color printing with AMS is required.
Some accessory supports are a bit difficult to remove. I personally use H2D with PETG HF or Support for PLA/PETG for dual-material support. The corresponding dual-material support profiles have also been uploaded, and are recommended for those with the setup to achieve a perfect support surface.
=========================================
The overall height of the model is approximately 14 cm.
The parts have been separated as reasonably as possible, but since some components are quite small or have complex shapes that are difficult to print successfully, not all sections have been completely split apart. Multi-color printing with AMS is required.
Some of the accessory supports are a bit tricky to remove. Personally, I use H2D with PETG HF or Support for PLA/PETG for dual-material support. The corresponding dual-material support profiles have also been uploaded and are recommended for those who have the setup, as they provide a perfect support surface.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)