Batman Hueforge
Print Profile(1)
Description
Boost Me (for free)
Each piece is a carefully layered composition that creates an illusion of depth, light, and emotion. Designed to be viewed, felt, and experienced — not just printed.
→ Link to my collection of works ←
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 172.29x250mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm
#000000 PETG GREG Black(черный) Transmission Distance: 1.4
#334039 PETG 3ds tech Grey dark(серый темный) Transmission Distance: 0.4
#93a3a4 PETG FDplast Light grey(светло серый) Transmission Distance: 0.8
#ffffff PETG Nit White(белый) Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black(черный)
At layer #8 (0.72mm) swap to Grey dark(серый темный)
At layer #10 (0.88mm) swap to Light grey(светло серый)
At layer #14 (1.2mm) swap to White(белый) for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)