BMW Jack Pad Adapter / Jack Point

This jack pad adapter was modeled as a high-strength rubber block alternative and adapted for the rectangular jack points of many BMW models. The design includes an M-logo and serves as a protective layer between the trolley jack and the original plastic jack point on the underbody.

Advantages:

• Protection: Prevents crushing of the factory jack pads and sills.
• Stability: Provides a wide, secure contact surface.
• Material: Printed with robust PETG-HF for high load capacity.

🚗 Compatibility

Successfully tested and suitable for the BMW M240i (G42).

The adapter is likely also suitable for many other BMW models with the standardized rectangular jack pad. Please measure the jack pad on your vehicle before printing.

⚠️ Important Disclaimer

The use of this self-printed component is expressly at your own risk and responsibility! I assume no warranty, guarantee, or liability for its function or durability.

A 3D-printed adapter may have material defects and could fail under the load of a vehicle, potentially leading to property damage or serious injuries. Never rely solely on this printed part when lifting a vehicle.