Skadis cable channer true vertical - wider - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

next_void

Household>Office

IP Report

Print Profile(1)

All

P1S

A1 mini

P1P

X1 Carbon

H2D

P2S

X1E

H2S

H2D Pro

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

44 min

1 plate

3.0(1)

Open in Bambu Studio

Boost

Released

Bill of Materials

Bambu Filaments

Select all

Gray (33101) / Filament with spool / 1 kg

PETG HF

Description

Based on the Starkger's vertical remix of the original LayerCraftCreation's cable channel for IKEA Skadis.

Mine is double the width to accomodate more/bigger cables.

Height and lenght are the same, so it can be mixed and matched with the other two models.

The top opening is about 4mm wider to squeeze bigger cables inside.

I printed mine with supports for the small nubs on the back but it can be printed without supports, in any case you will probably need to sand the nubs to properly fit on the skadis.

Just use something less brittle than PLA, I used Bambulab's PETG-HF and SUnlu PETG and both worked fine.

Comment & Rating (2)

@SFBaron

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

Other Issues:The distance of the Skadis hooks to the pins underneath does not fit. I had to remove the pins for it to fit (white Skadis plate, bought 04/26)

The profile uploader has replied

Show original

@next_void

This can happen. The original model was a really tight fit. The original is easier to install because there is only one hook and one nub, in my remix I added a second row of hook and nub and oh boy the installation is a struggle, but the result is a perfectly interlocked channel that won't budge under stress

No more