Defend Radish ABO Series blind box positioning base

This is a storage base for the Plants vs. Zombies ABO series mystery box figures, designed for a friend, allowing for neat display of the figures

• Used to add positioning when placed in acrylic display cases without built-in positioning or on a desktop, allowing multiple small figures to be neatly arranged in a row
• Individual alignment bases can be used to place single figures
• The positioning grooves perfectly match the mystery box bases, ensuring easy access while leaving minimal gaps
• The bottom is designed with positions for anti-slip pads / double-sided tape, allowing for fixation to the desktop or acrylic case using 10mm diameter, 1mm thick anti-slip pads or double-sided tape

Version 2.1, updated on 2025-11-20

• Dimensions adjusted to 65mm wide, 195mm long, 7.5mm thick, positioning groove inner diameter adjusted to 33.5
• Main body style
  • Suitable for standalone display
  • 3-position alignment base, 65 x 195
  • 1-position alignment base, 65 x 65
• Magnetic style
  • Divided into three parts: left, middle, and right
  • Reserved 3mm magnet installation slots on the right, both sides, and left respectively
  • Can be magnetically spliced as needed (including combining 1-position and 3-position)
• Positioning insert
  • It's difficult to achieve a good surface with 3D printing, and even top surface ironing may not yield satisfactory results due to filament issues
  • Therefore, I made this positioning base where you can cut out and paste printed images onto the top surface

Initially released version

• 1 row, 5 slots size
  • Length 298mm, width 58mm
  • This was designed for @Wxm_123456 who requested it, and it fits perfectly inside a dust cover with a width of 6cm * length of 30cm
• 1 row, 3 slots size
  • Length 188mm, width 58mm
  • This size allows three from one series to be placed in a row
• 1 row, 3 slots, infinitely connectable size
  • Length 188mm, width 58mm
  • Using a hidden bottom clasp, multiple units can be infinitely connected (if your cabinet is long enough)
  • For the leftmost part, only the left side is rounded, with a clasp position at the bottom right
  • For the middle part, neither end is rounded, with clasp positions at both ends
  • For the rightmost part, only the right side is rounded, with a clasp position at the bottom left
• Single 1-slot size
  • Length 60mm, width 55mm
  • Can be placed inside a single dust cover or displayed individually

This series is still being improved, special thanks to @Wxm_123456 for the ideas and the figures used for testing

If you have any custom size requirements, you are very welcome to send me a private message or leave a comment