Flexi Popsicle Fidget Toy

This is a flexible fidget toy inspired by a classic frozen popsicle. It was designed to be fully printed in place, with no brim or supports needed. There is minimal AMS required and the links in this model were specifically engineered to have enough range of motion without compromising on strength. 

I am trying to make these models every single day so please consider giving this model a either a like, collect, boost or download (or all of the above) and check out some of my other models.

Printing Instructions:

1. Prepare the Print Bed (Important Step!)
   • Clean the print bed thoroughly with isopropyl alcohol to ensure proper adhesion.
   • Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or a glue stick.
      
2. Download the Print Profile
   • Send the pre-configured print profile to your Bambu Lab printer through the Bambu Handy app or Download and open the pre-configured print profile in Bambu Studio.
      
3. Select Your Printing Options
   • Choose your filament type and color.
   • Select your print bed type (e.g., textured or smooth).
   • Confirm your printer settings, ideally for a Bambu Lab printer.
      
4. Start Printing
   • Begin the print job. No supports are necessary.