3dPrintInPlace

cover

copy_BC84E596-B0DB-4941-B182-A73060973461.GIF

IMG_1200.jpg

copy_1C6AB645-B201-4521-82E8-34F15D6D3AC9.GIF

Large

plate_1.png

Medium

plate_2.png

Small

plate_3.png

2025-10-29_6c06187566d908.jpg

3 Sizes on 3 beds Small Medium Large

NitroLayer3D

image0 (13).jpeg

image1 (5).jpeg

I just colored the star and made the supports easier to remove. 0.4 nozzle, 0.2 layer height, 6% infill.  If you enjoyed printing, please leave a review

Tree with colored star 

Bedan Designs

IMG20251101115646.jpg

IMG20251101115646 (1).jpg

IMG20251101115025.jpg

tree.png

This profile represents a highly specialized technical optimization focused entirely on solving the most significant pain point of printing this model: support reliability and ease of removal. By meticulously tuning the Tree Support parameters and Z-distances, this profile guarantees a cleaner underside surface and a massive reduction in post-processing effort and material waste, providing a superior and more reliable solution.Key Structural and Efficiency Optimizations (Substantive Value):<ol><li>Meticulous Tree Support Calibration (Critical User Benefit):<ul style="list-style-type: circle"><li>Modification: All Tree Support parameters were comprehensively optimized: Branch Distance (10mm), Branch Diameter (5mm), Branch Angle (60°), Diameter Angle (1°).</li><li>Justification: This deep calibration ensures the supports are structurally sound during printing but detach almost effortlessly after the print is finished. This represents a drastic improvement in user experience by minimizing post-processing time and preventing damage to the model&#39;s delicate underside.</li></ul></li><li>Optimized Z-Axis Clearance for Perfect Underside:<ul style="list-style-type: circle"><li>Modification: Top and Bottom Z-Axis Support Distances were precisely set to 0.22mm.</li><li>Justification: This precise, slightly increased clearance is crucial for a support-dependent model. It ensures a clean separation between the support material and the model, resulting in a significantly smoother and cleaner underside surface finish (which is often visible on decorative pieces).</li></ul></li><li>Structural Infill for Stability:<ul style="list-style-type: circle"><li>Modification: Infill is set to Gyroid (with an appropriate percentage, e.g., 10%).</li><li>Justification: Gyroid provides excellent structural stability for a tall, vertical decorative model, ensuring the tree stands rigid and maintains its shape during the printing process.</li></ul></li><li>Optimized Print Speeds (Time Saver):<ul style="list-style-type: circle"><li>Print speeds were collectively optimized for the P2S platform to achieve the most efficient print time possible while maintaining the quality required for the tree&#39;s visible surfaces.</li></ul></li></ol>&nbsp;Thank you to the author for creating this amazing model!Printer and Verification: This profile has been successfully verified with a test print on the Bambu Lab P2S printer.&nbsp;&nbsp;

Tree Support EasyRemove

MagnetDanny

photo_5778536153974770649_y.jpg

photo_5778536153974770636_y.jpg

photo_5778536153974770647_y.jpg

photo_5778536153974770644_y.jpg

photo_5778536153974770648_y.jpg

photo_5778536153974770651_y.jpg

photo_5778536153974770650_y.jpg

This profile is based on the original Twistmas Tree and uses settings adjusted for reduced material use. Printed at 0.28 mm layer height, 0% infill, with Arachne wall generator and nearest seam settings for balanced detail and print time.Supports were minimized to keep the print simple, so there are overhangs that will need to be cleaned carefully after printing. Using a hobby knife or deburring tool works well for this. The bottom surface may show some unevenness, but it’s not visible once displayed from the front (see the last pic of the bottom after cleanning).Print speeds were adjusted slightly to improve adhesion and bridging. The STL geometry is unchanged, A practical version for those who don’t mind a bit of post-print cleanup to enjoy the designer’s creative design.

Minimal Supports, Draft 0.28 mm, 0% infill, 3 walls, Arachne

drjhxie

9ef2d480-b5f3-11f0-bff3-b31dfa7c0eab.webp

All 3 Sizes on One Plate 0.2mm layer, 2 walls, 5% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Twistmas Tree 🎄✨Add a playful twist to your holiday decorations with the Twistmas Tree — a fun, spiral-style Christmas tree that looks like it’s dancing with joy! Its smooth, coiled design gives it a modern yet festive touch, perfect for printing in silk or matte filaments for that extra shine.&nbsp;&nbsp;<h2 style="text-align: center">***Check out Our 2025 Christmas collection!***</h2><figure class="image"><a href="https://makerworld.com/en/collections/14700774-2025-christmas-collection" target="_blank" rel="noopener noreferrer ugc"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001936731/design/2025-11-04_8c8d2d74d1765.gif"></a></figure><h2>***Careful when removing supports***  </h2>

Twistmas Tree

ASIA

Print Profile(5)

Description

Wanna sell my models?⬇️⬇️⬇️

Check out Our 2025 Christmas collection!

Careful when removing supports

Comment & Rating (693)

License

Related Models