Replacement Ozito PXC Line Trimmer head

UPDATE: removed the hole for the line to pass through, after testing i found the friction from the line would melt through the side of the hole making its way all the way out. Am currently testing with a brass insert which i have melted into the rough position that the original hole was in. Will test this, and if it does not work will end up removing the original insert from the factory head and melting it into place on the replacement.

The Ozito PXC Line Trimmer (PXCLTS-0182) is a great whipper snipper however the head which encases the bump feed tends to crack and break over time. This is my 2nd one and the head has cracked again.

This model is a replacement head unit which works identically to the original.

Disclaimer: I have used it twice since printing however further usage will be required to confirm whether it will hold up over time, such as the feed hole for the line.