My Sister-In-Law is very excited about this design! Printed cleanly, although it needed a decent amount of shaving with a razor blade to slide smoothly.

jhirschman

0.2mm layer, 4 walls, 12% infill

ikeymomo

Yes, something similar to the red clay pots.

user_1917918933

This is great! Do you happen to have one that makes flower pots?

teria algum modelo com todas divisões de 10mm ?

user_3313414616

not the best, lined internally so any beads are full of print line marks and not useable 

TheWalshies

I printed with Clear PETG at a 0.1 mm layer height and 0.30mm width.  There was a little bit of stringing but it looks like it turned out pretty great!  Thanks!

Lauttie

Evava

Sings

Tank237

user_90029588

cover

66992.jpeg

66994.jpeg

66996.jpeg

6mm, 8mm, 10mm Bead Roller

plate_1.png

68421.jpeg

Bead roller tool for making your own clay beads. This is set up to make 6mm, 8mm, and 10mm diameter beads. The handle includes a cutout to measure the exact amount of clay to use for each size. On the side of the roller channels is a fitted thread hole tool to get centered holes every time. Large enough to fit a large sewing pin or thin wire, plus wiggle room to make large enough thread holes.&nbsp;The whole thing is roughly 50mm x 70mm x 25mm.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

6mm, 8mm, 10mm Bead Roller.&nbsp;Has a built in measuring gauge built into the handle and a built in centered thread hole tool.

Print Profile(1)

Description

Comment & Rating (11)

License

Related Models