Frustration Rummy
Print Profile(1)
Bill of Materials
Description
Boost Me (for free)
I really appreciate the boosts, so if you enjoy or find useful, Please consider boosting me! Thanks.
After trying a few other versions of this game I decided to create my own with some improvements.
Pegs go inside board and secured by tight door and magnets (Optionally 5X2MM FOR DOOR AND 5X3MM FOR BOARD).
When you first go to put door on it will be VERY tight, so DO NOT TRY TO PUSH IN ALL THE WAY… Slowly work it back and forth until secure then should slide nice but still be snug.
Optionally you can also add one 5 mm x 3mm magnet to the main board and one 5mm x 2mm magnet to the door. You can get away with a 5mm x 2mm on the board as well, just do not press too far in and use a dab of glue to ensure they stay, but they will be very tight, so don't really need glue, but you can.
Board will hold 8 pegs so you can print two extra incase you loose any.
I do recommend you print one peg first to see how it fits the holes once the board is printed, then scale up or down by 2% to get desired fit.
Instructions are on the back so just grab two deck of cards and your ready to go!
Very popular gift to make for Christmas so feel free!
If you like consider sending a boost or two my way!
As always if there is something of mine that you like and would like tweaked in someway or perhaps something new created, please send me a message!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)