Bosch GKF 18V-8 Wall Mount Bracket | Router Holder

Simple, practical, and solid – no overengineering, just a clean functional design.

The router body simply slides into the main holder and hangs securely.
For the router base, I created a small dedicated holder where it can be neatly slotted in.
There’s also a small storage box for accessories – including a few parts I printed from other designers’ models.
The wrench can either be attached to a small screw on the wall (as shown in the photos) or stored in the box as well.

The box is optional and available as a separate profile,
or you can use the complete-set profile that includes everything together.

The holders can be easily mounted to the wall with screws,
and the setup also works perfectly on a French cleat system by mounting the holders onto a wooden plate.

I printed everything in PLA+, but any sturdy filament should work fine.
I used 20% infill just to be safe – 15% might already be enough depending on your material and printer setup.

Note: make sure the base is slightly extended when hanging the machine, to ensure proper fit and balance.