Tea House - 4 or 8 Varieties (without AMS)

A unique rotatable tea storage in the shape of a house

The normal version is for tea bags up to 64mmx73mm

Update: The large version is for tea bags up to 67mmx77mm. I added this version later by request

Both variants can be combined with each other, as long as each floor itself has the same size

This tea storage can be printed in various versions

• Either you print only the top floor for storage of up to 4 different types of tea or
• you print two floors, then up to 8 different types of tea will find their place there. For the lower floor, you have the choice between a window on the left (as seen in the pictures) and a window on the right
• For everyone who wants even 3 floors, the model can be extended downwards with both lower floors (regardless of whether the window is on the left or right)

The 4 bag holders are optional and are only recommended for small bags (e.g., from Teekanne). For large bags (e.g., Meßmer), it works better without the holders

The roof is removed to fill the upper floor

This model is designed to work without glue. However, I recommend attaching the two roof halves to the gables with glue

For assembly, 4 M3x6mm countersunk screws (thread length approx. 4mm) are needed per floor to attach the turntable to the house

I also glued small rubber feet to the bottom turntable so that it stands better on the countertop and doesn't slip. But it also works without them

More detailed information on assembly can be found in the assembly instructions

Do you want an addition or change? Feel free to send me a message, I will try to make everything possible

I hope you like my model, then feel free to leave a boost and a rating.