"Prison" Box with lid – 150 x 150 x 100 mm

🔒 Important: The majority of the models I offer are based on licenses or brands belonging to their original creators. They are therefore intended for strictly personal and non-commercial use.

🍻 Want to use a model for commercial purposes?

I'm just asking for a small gesture for the time invested in modeling:

💬 Buy me a virtual beer (€2.50 where I live!)

You can do it via PayPal right here ⬇️

🙏 Thank you for respecting the work, and for your support!

https://www.paypal.me/clairenteau

📝 Description :

🔒 "Prison" Box with lid – 150 x 150 x 100 mm 🏗️

Here is an original box with a "prison" design, ideal for storing, presenting, or offering your creations!
With its vertical bars and central patterned lid, it brings an industrial and design touch to your workspace, workshop, or office 🖤

🧩 Dimensions :
150 mm x 150 mm x 100 mm (total height with lid)

💡 Possible uses :

• Stylish storage box for small items 🔧
  
  
• Original presentation of 3D creations 🧱
  
  
• Decorative support for figurines or mini lamps ✨
  
  
• Fun gift for makers 🎁
  
  

🖨️ Recommended printing :

• Material: PLA or PETG
  
  
• No support structure needed
  
  
• Layer height: 0.2 mm
  
  
• Recommended infill: 5%

🛠️ Tips for perfect adhesion in 3D printing:

Clean your build plate thoroughly before each print. Grease residue, dust, or fingerprints can impair adhesion and cause detachments.

Check the plate calibration: a well-leveled plate guarantees a uniform and well-adhered first layer.

Use an appropriate adhesion surface: depending on your material, apply a thin layer of glue stick, adhesive spray, or a specific tape (e.g., Kapton, BuildTak).

Correctly adjust the plate temperature to promote adhesion according to the material used (PLA, ABS, PETG, etc.).

Reduce the printing speed of the first layer: a slower speed allows for better filament adhesion to the plate.

Plan for a « skirt » or « brim » in your slicer to stabilize the first layer and limit warping.