Search models, users, collections, and posts
Weezer Flying W Double Sided Keychain (Flying =W=)
IP Report
Print Profile(1)
0.2mm nozzle - dual colour print w/ AMS
Designer
1.2 h
1 plate
Open in Bambu Studio
Boost
10
42
2
0
42
24
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Description
Weezer Flying =W= logo keychain, made in the same style as my previous keychains.
I just used a cheap ball chain that you can buy in the 100s, but any key ring would work.
I designed it as separate parts to make it easier to colour code in the objects tab of Bambu Studio
IMPORTANT
Nozzle Size: 0.2mm - The detail is too small for a 0.4mm nozzle to print super well, though it should work fine if you were to scale it up.
Designed for use with AMS
Model Size: 34mm x 30mm x 5mm
Disclaimer: I do not take credit for the original logo design(s) and artistry. I have simply used existing assets to create a 3D object.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (2)