Sodastream DUO Bottle Holder incl. Drip Tray - Free 3D Print Model

Search models, users, collections, and posts

Insanity

Household>Other House Models

IP Report

Print Profile(2)

All

P1S

P1P

H2S

H2C

X1 Carbon

H2D

X1E

P2S

H2D Pro

X2D

A2L

A1 mini

0.2mm layer, 3 walls, 15% infill

Designer

12.6 h

3 plates

4.8(5)

0.2mm layer, 2 walls, 15% infill

Designer

21 min

1 plate

5.0(1)

Open in Bambu Studio

Boost

201

123

Released

Description

Content has been automatically translated.

Show original

Since the bottles of my Sodastream Duo standing around were getting on my nerves, I designed this holder with a drip tray. I saw the idea for the drip tray here, but since there were hardly any suitable storage options for the Duo's bottles and I like to have it near the Sodastream, I continued the idea and extended it with a bottle holder. The complete model consists of three parts that can be easily assembled after printing and offers space for four bottles

If there is interest in a solution with fewer bottles, please let me know, it wouldn't be a problem for me to create another solution

Update 15.01.2026

I have added a print profile for an adapter so that plastic bottles can now also be used. When assembling, simply insert the ring into the existing slots. A little force is needed to insert the adapters. Have fun with it

I would be happy about a like and a review

Boost Me (for free)

I share everything that makes my everyday life easier or just a little nicer – from practical tools to small decoration ideas.
I create and design for the fun of it, and if you like my ideas, your boost really motivates me to make even more!

sodastream

sodastream bottle

sodastream accessory

sodastream bottle bottom

soda stream stand

soda stream

soda stream bottle

soda stream bottle rack

Comment & Rating (20)

@Mintos

I printed the adapter for the plastic bottles and am very satisfied. It prints easily and works great!!

Show original

@Mintos

Print Profile

0.2mm layer, 3 walls, 15% infill

I find the model very good. However, I noticed a small point. I find the distance between the SodaStream and the holder a bit large. Maybe there's a way to make it smaller. Oh yes, maybe there's a possibility of an adapter to put the plastic bottles in there too. Unfortunately, they fall through the holes. But otherwise, a very successful project. I can only recommend it.

The profile uploader has replied

Show original

@Insanity

Hi, thanks for the feedback. I'll be happy to take another look at the spacing. I've already given some thought to an adapter for the plastic bottles, and an update could come in the near future. Regards

(Edited)

Show original

@Insanity

Hi, a small addendum. I have created the adapter for the plastic bottles and will probably upload it tomorrow. Here is the first draft

(Edited)

Show original

@Mintos

Replying to @Insanity :

Very cool, thank you very much for accepting the improvement suggestions. As soon as the adapter is available for download, I will try it out. Thank you!

Show original

@user_661361096

Boosted

Where can I find the adapter ring

The designer has replied

Show original

@Insanity

Hi, there is another print profile that includes the adapter

Show original

@user_661361096

Boosted

Replying to @Insanity :

but not on your side

Show original

@user_661361096

Boosted

Replying to @user_661361096 :

sorry bin relatively new to bambu studio found it

(Edited)

Show original

@aldarande

Hello and congratulations, if I can suggest an improvement, I would like a model with only two bottles on one side and a small container to collect dripping water

Show original

@user_661361096

Boosted

I wanted to suggest that too 😅, for space reasons, one side wouldn't be bad

Show original

@user_2631883826

Hello, I would also be interested in such a model

Show original

@user_1496204270

Hi, could this also fit for Crystal

Show original

@WA5TL

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

@moremax99

Print Profile

0.2mm layer, 3 walls, 15% infill

@Nickyplayz

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

@user_923783769

Print Profile

0.2mm layer, 3 walls, 15% infill

@Mintos

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

SodaStream bottle adapter

kubusiaasty

1.8 k

427

Duolingo Owl Duo

TiNiY

1.2 k

1 k

Sodastream to PET drink bottle adaptor

Rick269

1.8 k

859

Sodastream Flaschen halter 2fach

paiinx

2.8 k

421