Striated Tripod

cover

IMG_5013.jpeg

IMG_5014.jpeg

plate_1.png

2025-10-27_e0891e7fb8f8d8.jpeg

.06mm layer height0.2mm nozzle sizesupports required

0.2mm nozzle, 0.06mm layer, 5 walls, 15% infill

Robber

Brick

plate_2.png

Wool

plate_3.png

Stone

plate_4.png

Wood

plate_5.png

plate_6.png

Base

plate_7.png

Shmanter

IMG_5686.jpeg

IMG_5685.jpeg

Optimized for printing on an A1 mini with a single AMS. The robber, resources and base are printed separately and super-glued together. I repainted some of the resources to minimize the amount of colour swaps. I also found the cape to be very fragile so I super glued a piece of black 1.75mm filament between the cape and the robber body before gluing it to the base which has made it much sturdier (and it&#39;s invisible). Be VERY CAREFUL when removing the robber from the print bed. I recommend printing multiple robbers at the same time because the time / filament cost is minimal and it provides some extra insurance.Settings used in the pictured print:<ul><li>0.2mm nozzle</li><li>0.08mm “high quality” layer height and preset</li><li>Various matte PLAs</li><li>*Base was printed with 0.4mm nozzle and 0.12mm layer height</li></ul>

A1 Mini w/ AMS: 0.2mm nozzle, 0.08mm layer, seperate plates

miniature figurine of the robber game piece for the Settlers of Cattan board game. Base diameter is 25mm.

Catan Robber

ASIA

Print Profile(2)

Description

Comment & Rating (32)

License

Related Models