Telekom Speedport Smart 4 Holder Wall Mount
Print Profile(1)
Bill of Materials
Description
Wall mount for Telekom Speedport Smart 4.
The wall mount was designed for installing the router in a control cabinet in an industrial environment. Therefore, it is designed to be very robust.
The holder holds the router at a 102° angle to keep the front of the router parallel to the mounting surface, so you can still read the display even if the router is mounted higher.
The router is slid into the holder and then screwed in place with two clamps.
Two threaded inserts must be inserted into the clamps. The clamps are then screwed in place with M3x25 screws. The holder has 4 mounting holes with a diameter of 5.5mm.
I printed the holder in ABS no supports.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)