Bjorn Cyber Viking - Remix - Usb Ports Open

🇧🇷 Portuguese

This case for the Raspberry Pi 2W is a remix of the original design “Bjorn Cyber Viking Shelf Piece”.
The modification adds an extra side opening for the power and data cable connection of the Raspberry Pi.
The original model included only a rear opening for power wiring and soldering directly to the board — this feature was kept unchanged.
Only the basic automatic supports generated by the slicer were used for printing, with no further modifications.

 Parts used:

• Waveshare V4 E-Ink Display 2.13
• Raspberry Pi Zero 2W
• Bjorn Software — https://github.com/infinition/Bjorn

🇺🇸 English

This case for the Raspberry Pi 2W is a remix of the original design “Bjorn Cyber Viking Shelf Piece”.
The modification adds an extra side opening for the power and data cable connection of the Raspberry Pi.
The original model included only a rear opening for power wiring and soldering directly to the board — this feature was kept unchanged.
Only the basic automatic supports generated by the slicer were used for printing, with no further modifications.

Parts used:

• Waveshare V4 E-Ink Display 2.13
• Raspberry Pi Zero 2W
• Bjorn Software — https://github.com/infinition/Bjorn