Netgear GS105E Rack mount for 10 inch Rack

This is a 10 inch Rack rackmount panel for a Netgear GS105E prosafe managed switch. I wanted to mount it really well, even if the rack would have been carried are lay on it's side. So there is an additional mount added that can mount the switch snug to the shelve. It works with 2* M3 bolts that screw directly into the plastic. I used 8mm slotted bolts, but the holes are longer in the model so you should be able to use longer bolts.

The shelve has been designed to use the switch with the rubber feet still attached. This means there is still clearance between the shelve to dissipate heat as how the switch was designed.

This component is compatible with the LAB RAX 10 inch rack.

Just let me know in the comments if you like it, or if something needs to be adjusted or fine tuned.