Lock holder Epowerfun Epf-2 & Segway Max G3
Print Profile(2)
Bill of Materials
- Zylinderschrauben M5x16 x 2: Innensechskant
- Muttern M5 x 2:
Description
I created this lock holder for the Epowerfun Epf-2 Scooter
The holder has a suitable oval receptacle for a handlebar with dimensions of 46.20mm (min 45.20mm) x 38.50mm and is suitable for a handcuff lock with a diameter of 74mm and a height of 22mm
The two halves are held together with two M5 screws + nuts, the corresponding hexagonal receptacle for the nut is provided in the holes of one half, so nothing wobbles or falls out
You will need two M5 Allen (hex socket) screws with a minimum length of 16mm and two matching M5 nuts
Feel free to leave a comment or review, as well as suggestions for improvement :)
Boost Me (for free)
If you like my work, feel free to support me ;)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (24)