No otherworldly entry
Print Profile(1)
Description
No otherworldly entry
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.39x200mm in size. You can adjust the dimensions along the X and Y axes proportionally, but do not change the height of the model (Z axis).
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.3mm and the Actual Depth is 1.9mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
PLA PolyLite White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Brown
At layer #10 (0.88mm) swap to Red
At layer #14 (1.2mm) swap to Pumpkin Orange
At layer #16 (1.36mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)