MONSTER TRUCK BACKFLIP/LAUNCH RAMP LOSI MINI LMT

Are you ready for BIG AIR & BACKFLIPS!?
Look no further, This  3 piece modular ramp set will have your RC soaring!
Use indoors or outdoors.

Featured on @ZAYSADVENTURES RC On Youtube!

All 3 parts interlock and Separate by sliding the parts apart. They can be used individually in any way you can think of to create your own tricks.
Or fully assembled you can soar over 3' high off the launch side, and do incredibly high backflips. Designed around the 1/18th scale Losi Mini LMT monster trucks and will work with most truck style RCs 1/12th scale and smaller.

With 2 or more ramps and you can create even more ways to play, test your skills and jump ramp to ramp, create a larger box for tricks, or use the bottom smaller ramps for distance jumps, as well as link the ramps together to make it wider and also capable of using with RCs larger than 1/12th!

Bottom 2 sections have slots for 8, 1 inch non slip grips (not required). With grips ramps work well on bare flooring, carpet, asphalt, concrete and grass. They also have holes for tent/canopy stakes to keep them in place while playing in dirt gravel or sand.

Included with the model is a plate with tolerance calibration parts.

I HIGHLY encourage you to print these first, and calibrate your printer accordingly. Usually you can adjust your flow ratio up for a tighter fit, and down for a looser fit. I cannot guarantee that my print profiles will work on your printers or with your filament.

You want the test pieces to fit together with very little movement, but they should slide apart with very little effort. The tighter they are with the test pieces the harder the ramps will be to get together.

If you would like to see any add ons or modifications please let me know!

Supports can be used for the tab slots on the bottom but are not necessary if your bridging parameters are well tuned.

I use PETG for these ramps as they may be used outdoors, if you plan to use indoors PLA is fine as well.

I am working on additions, and ramps split up smaller to work on smaller printers. These ramps can be scaled down to fit your printer but you will need to make sure the interlocking parts work with the test print first.

You will need 2 1kg rolls of filament to complete this model!

Not for Commercial Use