Desktop trash can 3D printer waste bin snack bin sunflower seed cracking device separate plates no AMS needed no additional hardware snap-fit assembly smooth rotation

This is a mini version of a municipal garbage can, similar to those you see at waste disposal sites in residential areas or at emergency exits in office buildings

Its prototype comes from this—

All essential elements are included:

It has a body and a lid, and the lid can rotate on the body and close

It has wheels, which can roll to move the trash can

It has a recyclable symbol, even if what you put inside isn't necessarily recyclable ^_^

This size is perfect for collecting waste/trash next to a 3D printer, or for holding sunflower seeds while snacking

However, for ease of printing, some details were omitted, otherwise, there would be too many supports

Some parts were separated due to color considerations, to reduce supports, and to maintain surface quality, with each plate having only one color, allowing printing without AMS

To ensure printing strength, multiple modifiers have been added to the print profile, it is recommended not to delete them. Printing parameters are set by 'plate' and 'object', please do not modify them in 'global'

The handle, wheels, lid, and recyclable symbol are installed onto the body later; it is recommended to use glue for the recyclable symbol, while the other three parts can be installed directly (details of the assembly can be seen in the title image)

The entire assembly does not require any screws or other hardware, everything is 3D printed, using snap-fit or adhesive installation, and the movable parts rotate smoothly

Supports are all placed on the back or inside and have been specially configured to save material and be easy to remove, resulting in good model surface quality

The difference with or without a handle is

With Handle (Lid opens approximately 95°, can stand upright)

Without Handle (Lid opens approximately 180°, will not fall)

The lid has been upgraded with detailed improvements based on its real-life appearance

The interior of the body has also been upgraded, resulting in higher strength and improved print quality

If you want an even higher degree of replication, please visit my homepage to find another mini version

Model making is not easy, if you support it, please give a free boost!