Kaiju N8
Print Profile(1)
Description
Boost Me (for free)
đ "Your support makes all the difference! If you enjoy this project, feel free to boost it, drop a like and leave a comment. It really keeps the energy up! đ"
Project: Kaiju n°8.hfp
Print at 100% infill, with a layer height of 0.08 mm and a base layer of 0.16 mm
đ Model Dimensions: 154.62 x 200 mm
âïž You can print with higher layer heights, as long as they remain below the base thickness of 0.48 mm
The maximum allowed thickness is 1.92 mm, and the actual thickness is 1.68 mm
đš Filaments used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #00b1b7 PLA BambuLab Basic Turquoise  Transmission Distance: 1.4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
𧔠This model uses 4 unique colors
đ Filament change instructions:
- Start with black
- At layer #6 (0.56 mm), switch to blue gray
- At layer #11 (0.96 mm), switch to turquoise
- Then, at layer #14 (1.2 mm), switch to jade white until the end
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Project: Kaiju n8.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 154.62x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 1.92mm and the Actual Thickness is 1.68mm
Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #00b1b7 PLA BambuLab Basic Turquoise  Transmission Distance: 1.4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Blue Gray
    At layer #11 (0.96mm) swap to Turquoise
Border Only Colors from here until the end.
    At layer #14 (1.2mm) swap to Jade White for the rest.
Â
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)