AMS-HT TOP MOUNT TRAY FOR D3P RISER
Print Profile(1)
Description
THE MODEL IS BEING TESTED AND ANY FEEDBACK IS APPRECIATED. THE OBJECTIVE IS TO PROVIDE A SOLUTION FOR TOP FEEDING TPU FROM A DRYER.
MODEL
This is a tray that holds the AMS-HT single spool dryer. It mounts on the front of the D3P Riser for the H2D - H2S - H2C. The objective is to allow drying of the TPU while printing from the top.
Click here to find out more about the D3P riser system for H2D - H2S - H2C: D3P RISER FOR H2S - H2D
Alternate link: https://www.crealitycloud.com/model-detail/bambu-h2d-h2s-d3p-riser?source=22
ASSEMBLY
Assembly and installation are quick and simple.
1. Remove the glass lid and set the tray down on the middle of the front section of the H2D - H2S - H2C D3P riser.
2. Slide in the filament guide.
3. Secure the tray to the riser with the bolt.
4. Place the AMS-HT on the tray.
5. Run a PTFE tube from the AMS-HT through the hole at the front of the filament guide. You may need some glue to hold in the filament guide.
6. Feed the TPU Filament from the AMS-HT, through the PTFE tube and directly into the extruder.
3D PRINTING
IMPORTANT I upload a print setting files for all my models. The print settings has the parts positioned for correct printing.
EACH BUILD PLATE HAS THE TYPE OF SUPPORT REQUIRED INDICATED ON THE BUILD PLATE DESCRIPTION (TREE AUTO, TREE MANUAL OR NO SUPPORT).
I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings.
3D PRINT SETTINGS
I use the following settings and materials to print this model:
Infill % : 15% (no need for more)
Nozzle diameter: 0.4 mm
Layer height: 0.2 mm standard
Material: PETG is recommended. PLA will providing you do not rest a dryer on the shelf or print high temp filament such as ABS and ASA. PLA may deform due to the heat of the dryer or due to heat of printing high temp filaments. If you only will print PLA or PETG and will not use a dryer then PLA will work.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (84)