Batman aura Hueforge
Print Profile(1)
Description
Hueforge of the DC character Batman…
This hueforge has the special characteristic that it is created especially thin, to cover it with epoxy resin and frame it…
But this is up to personal preference!
Project: batman aura.hfp
Print with 100% infill and a layer height of 0.08 mm, with a base layer of 0.16 mm
The model measures 160.11 x 200 mm
You can print with higher layer heights, below the base thickness of 0.24 mm
The maximum allowed thickness is 2 mm and the actual thickness is 1.91954 mm
#000000 PLA ANYCUBIC BLACK Transmission distance: 0.8
#4c5f71 PLA BambuLab Basic Blue Gray Transmission distance: 3
#ebb003 PLA GST GOLD Transmission distance: 2
#ffffff PLA Sunlu Matte White Transmission distance: 5
This print uses 4 unique filaments
Change instructions:
Start with BLACK
At layer 7 (0.64 mm), change to Blue Gray
At layer 9 (0.8 mm), change to GOLD
At layer 11 (0.96 mm), change to white for the rest
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)