Turntable for models (Lazy Susan) - Free 3D Print Model

Search models, users, collections, and posts

Riski

Tools>Gadgets

IP Report

GIF

Print Profile(2)

All

P1S

H2D Pro

X1E

X1 Carbon

P2S

H2C

P1P

H2D

H2S

X2D

A2L

V2 - reinforced version - 0.2mm layer, 2 walls, 15% infill

Designer

5.3 h

2 plates

4.6(17)

V1 - Lightweight design - 0.2mm layer, 2 walls, 15% infill

Designer

3.3 h

2 plates

4.4(11)

Open in Bambu Studio

Boost

155

436

374

214

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

High Performance Bearings

Description

Content has been automatically translated.

Show original

🌟 Model Building Turntable (Lazy Susan) – Practical for Painting and Display 🛠️

01/10/2026

V1: Pin for the base plate's ball bearing corrected.

V2: New reinforced variant of the turntable

This turntable I designed is the ideal, simple tool for your craft table. It offers a basic rotating function – perfect for easily turning your models when painting them or for simply displaying them from all sides.

🔧 Construction & Assembly

The top plate is stable and provides a good bearing seat
The base plate / stand also offers a precise fit for the bearing. I have added holes there to optimize material consumption somewhat
Simple Design: Robust, uncomplicated construction that is easy to print.
Stable Stand: Flat base for secure grip on the workbench.

⚙️ Required Accessories for Assembly:

For the rotating function, only a standard ball bearing is required:

1x Type 608 ball bearing (Standard size, e.g., for skateboards or fidget spinners).

The bearing is pressed into the central recess of the turntable (white). Then the turntable is placed onto the central pin of the base (black).

⚠️ Notes:

Due to the central 608 ball bearing, the plate has a certain "flex". Parts must be positioned as centrally as possible.

🛠️ Printing Recommendations

Material: PLA (Tested) – The profile is optimized for this material.
Layer Height: 0.2 mm recommended.
Infill: 15% (sufficient, as the parts do not bear heavy loads).

Have fun building and painting your models! 🚀

Boost Me (for free)

If you like the model, feel free to leave me a boost or comment.

Comment & Rating (44)

@Stilzkin

Print Profile

V2 - reinforced version - 0.2mm layer, 2 walls, 15% infill

Thank you! It's a simple but very useful design, I printed the v2 and my 608zz bearing went without any trouble!

The profile uploader has replied

@Riski85

Glad that everything worked out ☺️👍🏼

Show original

@user_2658016769

does it work with 608-2RS: Rubber seals on both sides for superior contamination resistance.

The designer has replied

@Riski85

Hey, dimensionally it should fit well. It will just rotate a little less smoothly, since the 2RS wheels have a slightly higher rotational resistance.

@user_2658016769

Replying to @Riski85 :

thanks!

@user_3113959342

Print Profile

V1 - Lightweight design - 0.2mm layer, 2 walls, 15% infill

The bottom part doesn't go into the ball bearing it just rests on it Does it have to be this way wouldn't it be better if the pin also went into the ball bearing perhaps a rounded tip The turntable works it can be used

The profile uploader has replied

Show original

@Riski85

Thank you for the review Normally the pin should fit well into the bearing I intentionally designed it a bit tighter so it doesn't sit too loosely sometimes it helps to briefly heat the pin with a lighter and then push the bearing onto it If needed I can also create a version with more play

Show original

@Riski85

I just reloaded and looked at the current print project and realized that I had a cut in the construction of the base, which cut off the pin for the bearing. Now I understand the problem that several people had. V2 will be completely revised and uploaded today!

Show original

@user_2078734437

Boosted

Print Profile

V1 - Lightweight design - 0.2mm layer, 2 walls, 15% infill

The ball bearing did not fit for me

(Edited)

The profile uploader has replied

Show original

@Riski85

I noticed that the constructed pin was not present in the print profile at all. Apologies for the error. I have now corrected and updated it. However, an reinforced version of the turntable will also be released during the day. Thank you for the rating!

(Edited)

Show original

@wszqmrg4vk

Print Profile

V2 - reinforced version - 0.2mm layer, 2 walls, 15% infill

Printed great in PETG thank you

The profile uploader has replied

@Riski85

Good idea, thank you very much for the review

Show original

@user_3217791442

The ball bearing central hole is 7.95-8mm, the pin on the bottom part of the model is over 9mm in diameter, which is way too much for a tight fit.

The designer has replied

@Riski85

I found that the constructed pin was not present in the print profile at all. The diameter you described was merely the shoulder that represents the base (support for the inner ring). Apologies for the error. I have now corrected and updated it. However, an reinforced version of the turntable will also be uploaded later today

Show original

@PICHOUX

Print Profile

V2 - reinforced version - 0.2mm layer, 2 walls, 15% infill

super

@user_3217791442

Print Profile

V1 - Lightweight design - 0.2mm layer, 2 walls, 15% infill

Other Issues:Sorry, but I can't rate this model 5 stars just for the effort. The base part cannot be installed to the inner part of the bearing because the shaft diameter is way too big for pressure fit. Like, 1.5+mm too big, which means there's no way you can get a 608 bearing to sit on it. Melting the shaft to make it fit is not an option. There's not enough ground clearance for the top part of the turntable considering it's amount of flex.

Strength Issue:The top part flexes too much even with 100% infill. The base flexes too much as well due to its design. No ribs added for strength.

The profile uploader has replied

@Riski85

Thank you for the rating and constructive criticism I have just created a revised version in which I have tried to implement many of your recommendations The new version is currently printing and will be tested tomorrow If it works well I will update the turntable and let you know here

(Edited)

Show original

@Riski85

(Edited)

Show original

@user_359255666

Print Profile

V1 - Lightweight design - 0.2mm layer, 2 walls, 15% infill

The profile uploader has replied

@Riski85

Thank you for the wonderful review

Show original

@ZoNeGoD

Print Profile

V1 - Lightweight design - 0.2mm layer, 2 walls, 15% infill

(Edited)

The profile uploader has replied

@Riski85

Thanks for the 5 stars 👍🏼☺️

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Rotating Table (Lazy Susan)

MrTingles

2.7 k

778

Lazy Susan Lightweight - ⌀130 mm (36 g)

HenriqueAzevedo

7.2 k

1.1 k

GIF

Lazy Susan Turntable 100mm

robotcrazy

4.5 k

996

GIF

Lazy Susan

Aaron

4.7 k

1.4 k