Search models, users, collections, and posts
M5 Screws
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 15% infill
Designer
2.3 h
1 plate
Open in Bambu Studio
Boost
52
152
11
1
863
406
Released
Description
M5 Screws Kit
Contents:
- Hex Head Screws: 1×M5×10; 1×M5×20; 1×M5×30; 1×M5×40; 1× M5×50;
- Cross Drive Head Screws: 1×M5×10; 1×M5×20; 1×M5×30; 1×M5×40; 1× M5×50;
- Nut: 1×
- Washers: 2×
- Wing Nut: 1×
For good results, you need a layer height of 0.08mm
Note: These screws are 3D printed. Their mechanical strength is limited and they may not withstand significant loads.
Boost Me (for free)
If you enjoyed this design and found it useful, I’d greatly appreciate a Boost!
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)