Bambu Lab A2L + A1 + A1 Mini| Camera Mount - Free 3D Print Model

Search models, users, collections, and posts

ProtoBit

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

H2D

P1P

H2C

A2L

X2D

X1E

H2S

P2S

A1 mini

H2D Pro

P1S

X1 Carbon

Fixed Mount | 0.4mm Nozzle | Updated

Designer

44 min

1 plate

4.9(8)

Open in Bambu Studio

Boost

100

Released

Description

Boost Me (for free)

👍 Thank you for the support! Helps keep these free and accessible for everyone!

This is a camera drop designed to align the initial camera angle—especially useful for monitoring that crucial first layer. I searched beforehand, but if an existing version already covers this, please let me know so I can reference or update accordingly.

Installation Steps:

Remove the front panel.
Carefully pop the original camera out of its mount.
Insert the camera into the new drop mount.
Push the new mount back into the original slot.
You may need to pull a bit of cable slack to seat it properly.

For official guidance, refer to Bambu Lab’s camera replacement instructions:
https://wiki.bambulab.com/en/a1/maintenance/camera-replacement-guide

Disclaimer:
This is an unofficial, user-designed modification. It is provided as-is with no warranty. Proceed at your own risk, and use care when removing or handling the camera components to avoid damage.

🚀 Even if you don't necessary use or need this model - please consider liking and following to help support free 'public domain' models - Thank you!

🚀 Tus likes y follows apoyan los modelos abiertos y gratuitos para todos.💖

🚀 让免费开放的模型继续成长！点个赞并关注，给它们一点爱吧。✨

Need a print but don't have the machine, time, or build volume?

Find me on Etsy and use code FELLOWMAKER for 20% off

Want something different or custom commissioned? Hit me up!

camera

BAMBULAB

printeraccessories

Comment & Rating (14)

@mr_valerich

if you want to break your printer do it. I don't recommend printing this. too big, rests on the body behind. does not fit the installation place this model will break the body of your printer. even the author in the photo is already broken because it is too big and does not fit.

The designer has replied

@protobit

Thanks for the feedback! I’ll get that corrected.

@mr_valerich

Replying to @protobit :

Hi friend, I see you've changed your creation, it's a good idea, but you still need to refine it. You need a lid behind it, there will be a lot of debris and dust inside, it would look better with a lid behind it. I'd be grateful if you could do this and I could install it on my printer.

@3Do_TorriLab

Print Profile

Fixed Mount | 0.4mm Nozzle | Updated

Almost perfect, the only flaw is that the joints are not very precise, either too tight or too loose, otherwise very good! 😊

Show original

@Buddoslot

Print Profile

Fixed Mount | 0.4mm Nozzle | Updated

👍

@BabyNinja

i printed with the fine settings and it is just what i was looking for. thank you for this design.

@user_4180758385

Boosted

Print Profile

Fixed Mount | 0.4mm Nozzle | Updated

Just what I was looking for, printed perfect, fitted great.

@user_4180758385

Boosted

Just what I was looking for, took all of 5 minutes to fit, only problem I had was the holding tabs on the main body did not click in to place, but it sits there and is not loose.

@DEMACONSteeve

Print Profile

Fixed Mount | 0.4mm Nozzle | Updated

Thanks Nickel 👍

Show original

@user_4190382757

Awesome please make more for the A1

Show original

@gambits

Print Profile

Fixed Mount | 0.4mm Nozzle | Updated

@user_2234630573

Print Profile

Fixed Mount | 0.4mm Nozzle | Updated

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.