Rabbit Series Sanrio Bad Badtz-Maru~no multi-color printing, no AMS required~ Separate parts and colors toy ornament

Rabbit Series Sanrio Bad Badtz-Maru~no AMS required separate parts and colors toy ornament~

There are two size presets~ I personally recommend printing the large size!!! The large size version makes eyes, mouth, and nose easier to install.

All small parts have skirts. If you don't like skirts, you can modify the preset on your computer. The parts are relatively small and require careful handling or glue for installation. No instructions are needed as it's simple to install by aligning the separate parts according to their contours. The rabbit's chin area is relatively thin, so be careful when removing supports to avoid damaging the model.

The glasses and lenses need to have their support surfaces trimmed with a hobby knife or similar tool before they can be glued into the frame. Alternatively, scale the lens size, as the sinkage rate of each filament might affect the fit. It is best to use tough filaments like PETG or PLA+!

I used PETG Silk Shiny Silver for printing, and the texture is superb~

The preset is for PETG printing; if you need to switch to PLA, you can change the PLA preset yourself for printing. Try to use filaments with good layer adhesion for printing.

The homepage also has different Sanrio characters from the entire series~

If you like it, please follow me for continuous updates on more Sanrio models