Ubiquiti U7 Access Point Stand / Wall Mount

Ubiquiti U7 Pro XGS / XG Access Point Desk Stand / Wall Mount

This desk stand is designed for the Ubiquiti U7 Pro XG/XGS access point. It secures the AP using the existing holes on its mounting plate, which align with a C: 3.5" Round Junction Box (US) pattern for stable placement on desks or shelves.

Key Features

• Spacious Cable Pass-Through: Includes a large opening to fit any standard patch cable, allowing for tidy cable management.
• Hollow Shell Structure: Lightweight and efficient, printed as a thin shell to save material without compromising rigidity.
• Sharp Edge Design: Features angular edges that match the industrial aesthetic of the U7 Pro XG/XGS series.
• Broader Compatibility Potential: Could work with other Ubiquiti access points (untested)—share measurements or feedback from your model, and I'll refine the design!

Print Settings

• Orientation: Prints upright, no supports needed.
• Perimeters: 5 perimeters for strength
• Seam position: “Back” for optimal finish.
• Material: Consumes about 80g of PLA.

Mk II Update

• Easier Pass-Through: The stem cavity for pass-through is bigger, and the holes are much bigger. Thick Cat6A UTP cable now fits easily.
• Internal Lip: For better bed adhesion; no need to add a brim or mouse ears.
• Wall Mount Option: The second plate contains a bracket and stiffener.
  • The bracket can be screwed to the wall with the ledge up (if you can achieve full contact with the wall) or upside down (if the wall plug protrudes from the wall). You can cut the bracket or split it into multiple pieces if it interferes with something.
  • The stiffener can be glued onto the bracket if you don't trust the layer adhesion and are afraid that the screw could split the bracket. They're intentionally printed in different orientations.

Perfect for enhancing your network setup with a custom, stable stand.