Search models, users, collections, and posts
Construction Cone Stress Ball - TPU
IP Report
Print Profile(2)
0,4mm Nozzle - 0.2mm layer, 2 walls, 4% infill
Designer
1.3 h
1 plate
0.6mm nozzle - 0.24mm layer, 1 walls, 5% infill
Designer
2 h
1 plate
Open in Bambu Studio
Boost
126
307
99
33
979
624
Released
Description
Boost Me (for free)
If you would like to support my work, feel free to give me a boost!
The Construction Cone Stress Ball
Printing Tips :
- If you are not using the provided profiles, add a small 5mm diameter cylinder modifier with no bottoms at the bottom of the cone
- Print in TPU, Duramic 3D 95A will work great
- Option 1 : 0,4mm nozzle profile is squishy but stiff
- Option 2 : 0,6mm nozzle profile will give a squishier feel
- Generic TPU filament profile worked great for me
Printing Settings :
- For a 0,4mm nozzle : 0,20mm layers, 6 tops, 3 bottoms, 2 walls, 5% gyroid infill
- For a 0,6mm nozzle : 0,24mm layers, 4 tops. 3 bottoms, 1 wall, 4% gyroid infill
Disclaimer :
- AMS and AMS Lite are not meant to feed TPU to the printer, use the external spool option
- The hole at the bottom of the print is meant to be there, it helps air escape and enhances the squishiness
- The squishiness of the stress ball will vary with TPU hardness, brand and color, you can play around with the infill % to change the feel
Membership
If you're interested in selling prints of my models, check out my commercial license tiers
Join
License
If you want to use this model commercially, please join my membership.
Join Now
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (99)