Lever Action Rifle Dual Guns - Covenant Undertaker

1. These two dual guns, the short one is approximately 80cm and the long one is approximately 110cm. They are entirely made of 3D printed parts, requiring no other materials.

2. For connecting parts, it is recommended to use 502 glue or AB glue (it is recommended to use AB glue for connecting the barrel and the gun body, as I left a relatively large tolerance during design, and 502 glue might not provide a strong enough bond).

3. If you use the filament colors specified in the file and have an AMS multi-color printing system, no post-printing painting is required. If you don't have an AMS, you only need to paint the casing of the barrel (of course, printing a white model and painting it entirely yourself is also fine, as the official filament colors are relatively few).

    ·PLA Matte Latte Brown 11800

    ·PLA Silk+ Silk Gold 13405

    ·PLA Silk+ Silk Silver 13109

    ·PLA Basic Jade White 10100

    ·PLA Basic Dark Gray 10105

    ·PLA Basic Black 10101

    ·ABS Black 40101