Spiral Slip + Flip Fidget Toy (37 min)

Thank you for your support! If you like our family's designs - you can sell the physical prints through a paid Patreon membership: 

https://www.patreon.com/c/SpacedOutStudio

Let this fully cool after print (you can remove from the build plate) and rotate the hinges – NOT the pin – and then press the pin between your fingers to break the supports (don’t twist the pin – see image below). If you have filament and settings dialed in you can also gently twist the pin until you feel a little resistance, then twist the other way gently until it fully loosens. The hinges should move just fine. The more you play with it, the more it will loosen. PLA will work great. Some filaments will allow movement right after the print.  If you have issues, please contact me and happy to help. 

🌀 The Spiral Flip Fidget! 🌀

Get ready to twist, turn, flip, and lose track of time with this hypnotic two-color Spiral Flip Fidget! Each side features a different swirling design that’ll have you feeling like you’re falling into another dimension.

This little stress-buster prints in just 37 minutes, using a hinge-and-pin design that flips smoothly and satisfies endlessly. Whether you’re zoning out, fidgeting through a meeting, or pretending it’s “for the kids”.