Stream Deck Plus Desk Mount for Monitor Riser
Print Profile(1)
Bill of Materials
Description
I designed this Stream Deck Plus mount specifically for Monitor Risers. It mounts in a fixed position facing forward. You can also mount this to the edge of any desk. As a bonus, it also works pretty much the same as the original stand if you decide to unmount it.
This mount requires a 90 degree USB-C adapter (I used a magnetic one) OR a right angle USB-C cable. This is by design so that the cable is as low profile as possible and the Stream Deck Plus does not stick out too much.
There is a cable channel integrated within the mount to cleanly hide the cable out of view.
To install, unscrew the base and use those same screws to attach to the new mount. Then, using a 1/8" drill bit, drill a pilot hole ½" into you desk and screw in with #8-¾" wood screws or similar.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)