Steel/Rimfire Challenge ruger magazine caddy

remixed from thingivers model: https://www.thingiverse.com/thing:2436771

6 slots for magazines, has a handle that goes down when you put it down.
Has some large pockets in the back for used mags at the firing line.

You will need an m3x20 screw (or 1/8 will probably work but you'll need to resize the holes and square nut part) and an m3 square nut.
Since square nuts come in different sizes, I made 2 versions for the 2 sizes of square nuts I own. If you don't want to use a square nut I added a self-tapping version. Still m3x20 and maybe add a little glue.

Recommend PETG 2 walls minimum 10% cubic infill minimum. If you make it out of translucent PETG and do it slow it will look pretty.
Handle can be 3 walls 20%.

Assemble: see exploded view. Insert square nut into handle (may help to heat up the square nut if it's tight). Insert handle from top. Insert base from bottom, screw in m3x20.