Staind "Break the Cycle" Album - Hueforge Art - Free 3D Print Model

Search models, users, collections, and posts

Alex Nalbufin

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(0)

Add the first print profile to earn points

Boost

Released

Description

Staind "Break the Cycle" Album - Hueforge Art

Print at 100% infill with a layer height of 0.2mm with a base layer of 0.16mm

The Model is 127x127mm in size
You may print at higher layer heights below the Base Thickness of 0.56mm
The Max allowed Thickness is 2.36mm and the Actual Thickness is 2.36mm

Filaments Used:
    #000000 PLA BambuLab Basic Black Transmission Distance: 0.6
    #10518d PLA Protopasta Blue Wonder Glitter Transmission Distance: 9
    #3d6085 PLA Paramount 3D Cadet Blue Transmission Distance: 2.5
    #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (1.16mm) swap to Blue Wonder Glitter
    At layer #8 (1.56mm) swap to Cadet Blue

Border Only Colors from here until the end.
At layer #10 (1.96mm) swap to Jade White

This slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.
At layer #20 (3.96mm) swap to Jade White for the rest.

Comment & Rating (0)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.