Masterbuilt electric smoker transport wheels

Custom transport wheels for the electric smoker from Masterbuilt.

Non-printable parts needed:

• Four 608ZZ bearing
• Two M6x35 mm bolt
• Two nuts on M6 bolt

TODO list:

1. Print (mine printetd with PLA+)
2. Put two 608ZZ bearings to each side of wheel. Using vice or small hammer should help.
3. Put a tube as an axle of wheel bearings.
4. Place the wheel (with bearings and tube inside) between wheel supports in “corner” element.
5. Put a M6 bolt. It should go through both screw holes in supports and go through the tube in the wheel.
6. Secure bolt with a nut.