Torosaurus hueforge

For Personal Use Only: Print as many as you like for yourself
Commercial License : Not allowed unless you hold a valid license on Makerworld or from my Patreon

Torosaurus was a large, herbivorous dinosaur that lived during the late Cretaceous period, around 68 to 66 million years ago, in what is now North America. It belonged to the ceratopsid family, closely related to the more famous Triceratops, and was part of the subfamily Chasmosaurinae, known for species with long frills and large brow horns. The name Torosaurus, meaning “perforated lizard,” refers to the distinctive large openings, or fenestrae, in its frill, which set it apart from other ceratopsids whose frills were typically solid bone.

Torosaurus was among the largest horned dinosaurs, measuring up to nine meters in length and weighing between six and eight tonnes. Its most striking features were its enormous skull and elongated frill, which could reach over two and a half meters long, making it one of the largest skulls of any land animal ever discovered. The frill itself was thin and supported by a network of bone struts, with two large oval openings that reduced weight without compromising structural strength. Extending from the front of the skull were two long brow horns that projected above the eyes and a smaller horn on the nose, giving it a formidable appearance likely used for display, defense, and species recognition.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170x170mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #151715 PLA Deeplee Black  Transmission Distance: 0.1
    #626f89 PLA Deeplee Blue Grey  Transmission Distance: 2.5
    #8e8f8f PLA Deeplee Light Grey  Transmission Distance: 1
    #ffffff PLA Deeplee White  Transmission Distance: 6.1
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Grey
    At layer #12 (1.04mm) swap to Light Grey
    At layer #17 (1.44mm) swap to White for the rest.
 

You can see my other Dinosaur pictures here in this collection: https://makerworld.com/en/collections/14092197-dinosaur-hueforge

You can Download a stand I have designed to fit  my Hueforge Artwork WITH a border at https://makerworld.com/en/models/1873510-hueforge-display-stand-for-prints-with-borders#profileId-2005518 or for Hueforges WITHOUT a border use this one: https://makerworld.com/en/models/1872617-hueforge-display-stand-for-prints-without-borders#profileId-2004540

If you print this model, please upload a photo of your result, Rate the print and leave a Review. 

Not only does it inspire others in the community, I'd love to see what people have done!