Argentinosaurus hueforge

For Personal Use Only: Print as many as you like for yourself
Commercial License : Not allowed unless you hold a valid license on Makerworld or from my Patreon

Argentinosaurus was one of the largest known dinosaurs to have ever existed, belonging to the group of long-necked, plant-eating sauropods that dominated the Cretaceous landscapes of South America. It lived approximately 95 to 100 million years ago during the Late Cretaceous period, in what is now Patagonia, Argentina—a region that was then a warm, forested environment with lush vegetation and open floodplains suitable for such colossal herbivores.

This dinosaur was a titanosaur, a subgroup of sauropods distinguished by their wide stance, column-like limbs, and in some species, armored skin. Argentinosaurus stood out even among these giants. Based on the limited fossil material discovered—mainly vertebrae, ribs, and parts of the pelvis—it is estimated to have reached a length of around 30 to 35 metres (98 to 115 feet) and possibly weighed between 60 and 100 tonnes, though exact figures remain debated due to the fragmentary nature of the remains. Its body was massive and barrel-shaped, supported by thick, pillar-like legs that bore the immense weight of its bulk. The long neck, composed of elongated vertebrae, allowed it to reach high vegetation, while the tail, equally long and muscular, provided balance and stability.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170x170mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #151715 PLA Deeplee Black  Transmission Distance: 0.1
    #626f89 PLA Deeplee Blue Grey  Transmission Distance: 2.5
    #8e8f8f PLA Deeplee Light Grey  Transmission Distance: 1
    #ffffff PLA Deeplee White  Transmission Distance: 6.1
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Grey
    At layer #10 (0.88mm) swap to Light Grey
    At layer #15 (1.28mm) swap to White for the rest.

You can see my other Dinosaur pictures here in this collection: https://makerworld.com/en/collections/14092197-dinosaur-hueforge

You can Download a stand I have designed to fit  my Hueforge Artwork WITH a border at https://makerworld.com/en/models/1873510-hueforge-display-stand-for-prints-with-borders#profileId-2005518 or for Hueforges WITHOUT a border use this one: https://makerworld.com/en/models/1872617-hueforge-display-stand-for-prints-without-borders#profileId-2004540

If you print this model, please upload a photo of your result, Rate the print and leave a Review. 

Not only does it inspire others in the community, I'd love to see what people have done!