Toilet thinker by e.ferazzini

e.ferazzini

Art>Sculptures

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.08mm layer, 2 walls, 15% infill

Designer

5.9 h

1 plate

4.2(5)

Open in Bambu Studio

Boost

101

Released

Description

The Toilet thinker.

we have all been there, celebrate that moment.

I'd suggest a golden, bronze or marble filament to give it the significance such a statue deservers.

I split the model in parts so you can use different filaments if you want, and it's easier to print without failures. just glue his but and the left foot to the toilet

toilet

thinker

stature

Comment & Rating (15)

@painisintheanus

Print Profile

0.08mm layer, 2 walls, 15% infill

Printed body in Clear PETG and Toilet in White ABS, came out very nice! Thank you a lot, now my toilet looks a lot more philosophical!

The designer has replied

@e.ferazzini

the clear PETG gives it a mystic aura, great choice!

(Edited)

@user_1053363724

made this in green PLA+, came out great! Adds thought to using the restroom

The designer has replied

@e.ferazzini

I hope it will keep you company in all your thoughtful stinky deeds!

@Goose182

Print Profile

0.08mm layer, 2 walls, 15% infill

this is in my bathroom. makes me smile every time.

The designer has replied

@e.ferazzini

served its purpose then! I'm really glad

@seanspring816

Print Profile

0.08mm layer, 2 walls, 15% infill

prints great just as shown thank you

The designer has replied

@e.ferazzini

thank you for your feedback!

@thomas.aumeier

what scale factor you had created it?

The designer has replied

@e.ferazzini

the measurements are those found in the file

@3DyourLife

Print Profile

0.08mm layer, 2 walls, 15% infill

Strength Issue

The designer has replied

@e.ferazzini

can you please describe your problem a bit better? As you can see I had no problem whatsoever printing it, so I might help with some suggestions with your settings cos I don't think the issue is with the files I provided

@3DyourLife

Replying to @e.ferazzini :

The toilet was printed properly, but with the figure, "threads" were printed at some point without it being related to the figure.

@e.ferazzini

Replying to @3DyourLife :

sorry but I don't understand what you mean exactly. I tested this print myself and it came out perfectly in that position. if you had any problems with how it was printed I'd suggest to check for the usual things: clean your plate, dry your filament, check room temp and if you have drafts that might interfere with the print temperature. also if you use a particular filament, I'd suggest you to calibrate your settings for it for the best results.

(Edited)