P1S/P2S/X2D riser - Manual Grille, Side Pegboard

Features:

• Single plate print, no supports, requires less than 300g filament.
• 27mm raised height, perfectly avoids filament tube rubbing.
• 4 manual ventilation grilles front and back, for quick switching between ventilation and chamber temperature.
• IKEA pegboards on both sides, universal attachments can be quickly installed and removed.
• Measured to original machine dimensions, perfectly compatible with P2S and other models (a P1S version is also available, found in print profile).
• Mortise and tenon assembly structure, fast and secure assembly.

Ventilation Grilles:

• Uses 2 front and 2 rear grilles, ensuring sufficient ventilation.
• Manual open/close switches, convenient and quick.
• Simple and easy to maintain.

IKEA Skadis Expansion:

• Compatible with IKEA Skadis pegboards, highly expandable.
• Expansion accessories shown in the image are available in the print profile.
• Holes are not connected to the interior, does not affect airflow.

IKEA Skadis Expansion:

• Small pen holder, can hold small items such as utility knives, scrapers, deburring tools, etc.
• Can be found in the print profile.

IKEA Skadis Expansion:

• Two large boxes, in the same print profile, can be found in the print profile.
• Dimensions: 115*80*65mm/155*80*65mm.

IKEA Skadis Expansion:

• Printing plate cleaner holder, for more convenient placement of cleaning wipes.
• Printing plate cleaner download links: International site, Chinese site
• Also available on my homepage.

TPU Feed Assist Holder:

• Simplest way to install the TPU feed assist holder.
• Card slot is perfectly compatible, stable, and secure.
• This accessory is an official kit, for details, please go to: International site, Chinese site

*Made according to actual measurements, with appropriate gaps reserved, and adjusted after multiple tests.

*The greatest truth is the simplest, I don't prefer overly complex or dazzling designs, my goal is only simple practicality, allowing users to achieve results beyond expectations without much cost, I will continue to explore and discover more practical tools.

About Installation (corresponding numbers at the clips):

• Since the machine glass position is not square, the four-sided clips have an anti-foolproof design (please assemble according to the corresponding numbers), please arrange the installation direction in advance when installing:

1. The ventilation grilles are located on the front and back of the riser, and all pegboards are on the sides.
2. If you find it doesn't fit after assembly, it means you assembled it incorrectly, just disassemble and reassemble.

• Four-sided ventilation model assembly:

1. Please assemble according to the corresponding numbers, the top screw recess should be at the front of the machine, used to embed the handle screw of the glass lid.
2. After assembling the front two, place the rear two in advance before assembling.
3. If you find it doesn't fit after assembly, it means you assembled it incorrectly, just disassemble and reassemble.